4.3 Hierarchical Routing

In the previous section, we viewed "the network" simply as a collection of interconnected routers. One router was indistinguishable from another in the sense that all routers executed the same routing algorithm to compute routing paths through the entire network. In practice, this model and its view of a homogenous set of routers all executing the same routing algorithm is a bit simplistic for at least two important reasons:

Both of these problems can be solved by aggregating routers into "regions" or "autonomous systems" (ASs). Routers within the same AS all run the same routing algorithm (e.g., a LS or DV algorithm) and have full information about each other -- exactly as was the case in our idealized model in the previous section. The routing algorithm running within an autonomous system is called an intra-autonomous system routing protocol. It will be necessary, of course, to connect ASs to each other, and thus one or more of the routers in an AS will have the added task for being responsible for routing packets to destinations outside the AS. Routers in an AS that have the responsibility of routing packets to destinations outside the AS are called gateway routers. In order for gateway routers to route packets from one AS to another (possibly passing through multiple other ASs before reaching the destination AS), the gateways must know how to route (i.e., determine routing paths) among themselves. The routing algorithm that gateways use to route among the various ASs is known as an inter-autonomous system routing protocol.

In summary, the problems of scale and administrative authority are solved by defining autonomous systems. Within an AS, all routers run the same intra-autonomous system routing protocol. Special gateway routers in the various ASs run an inter-autonomous system routing protocol that determines routing paths among the ASs. The problem of scale is solved since an intra-AS router need only know about routers within its AS and the gateway router(s) in its AS. The problem of administrative authority is solved since an organization can run whatever intra-AS routing protocol it chooses, as long as the AS's gateway(s) is able to run an inter-AS routing protocol that can connect the As to other ASs..

Intra-AS and Inter-AS routing
Figure 4.3-1: Intra-AS and Inter-AS routing.

Figure 4.3-1 illustrates this scenario. Here, there are three routing ASs, A, B and C. Autonomous system A has four routers, A.a, A.b, A.c and A.d, which run the intra-AS routing protocol used within autonomous system A. These four routers have complete information about routing paths within autonomous system A. Similarly, autonomous systems B and C have three and two routers, respectively. Note that the intra-AS routing protocols running in A, B and C need not be the same. The gateway routers are A.a, A.c, B.a and C.b. In addition to running theintra-AS routing protocol in conjunction with other routers in their ASs, these four routers run an inter-AS routing protocol among themselves. The topological view they use for their inter-AS routing protocol is shown at the higher level, with "links" shown in light gray. Note that a "link" at the higher layer may be an actual physical link, e.g., the link connection A.c and B.a, or a logical link, such as the link connecting A.c and A.a. Figure 4.3-2 illustrates that the gateway router A.c must run an intra-AS routing protocol with its neighbors A.b and A.d, as well as an inter-AS protocol with gateway router B.a.

Internal architecture of gateway router A.c
Figure 4.3-2: Internal architecture of gateway router A.c

Suppose now that a host h1 attached to router A.d needs to route a packet to destination h2 in autonomous system B, as shown in Figure 4.3-3. Assuming that A.d's routing table indicates that router A.c is responsible for routing its (A.d's) packets outside the AS, the packet is first routed from A.d to A.c using A's intra-AS routing protocol. It is important to note that router A.d does not know about the internal structure of autonomous systems B and C and indeed need not even know about the topology connecting autonomous systems A, B and C. Router A.c will receive the packet and see that it is destined to an autonomous system outside of A. A's routing table for the intra-AS protocol would indicate that a packet destined to autonomous system B should be routed along the A.c to B.a link. When the packet arrives at B.a, B.a's inter-AS routing sees that the packet is destined for autonomous system B. The packet is then "handed over" to the intra-AS routing protocol within B, which routes the packet to its final destination, h2. In Figure 4.3-3, the portion of the path routed using A's intra-AS protocol is shown in red, the portion using the inter-AS routing protocol is shown in blue, and the portion of the path routed using B's intra-AS protocol is shown in green. We will examine specific inter-AS and intra-AS routing protocols used in the Internet in Section 4.5.

The route from A.d to B.b: intra-AS and inter-AS path segments
Figure 4.3-3: The route from A.d to B.b: intra-AS and inter-AS path segments.



Copyright Keith W. Ross and James F. Kurose, 1996–2000. All Rights Reserved.